Hengstler 0.734.007 | 7 Digit LCD Counter with 1 Preset (Internal Battery Power)

Hengstler 734 Series Counter

  • Dimensions (H) 36 x (W) 72mm
  • Mounting Depth Only 29mm
  • LCD Display 12mm Digit Height
  • Volt Free Count Input
  • Up to 28V DC Low Voltage Count Input
  • Additional Option Modules Available
  • Programmable Low or High Speed Setting
  • Operating Temperature 0°C to +50°C
  • 10 Year Typical Battery Life - Replaceable
  • Protection Class IP65 (Front Side)
  • Optional Backlighting

The Hengstler 734 or Veeder-Root A103 series (fully interchangeable) self-powered electronic single preset counter with a 7 digit display is equipped with an SSR relay (0.1A @ 30V AC/DC) which can be programmed to open or close upon reaching a preset value. Additional option modules allow for high voltage count inputs, an AC power supply or a standard mechanical relay output (5A @ 120/240V AC or 30V DC) should your device being signalled require more power. Modules are ordered separately and attach to the rear of the counter, please call us for further information. Programmable count direction, additional backlighting, simple connectivity and ease of programming are just some of the features that this counter has to offer. It is important to note that this counter has no decimal point calibration and is not scaleable making it very simple to set-up and use.

Two batteries (Type CR 1/2AA 3V - Hengstler part number E3533.355) can be installed to achieve up to a 10 year battery life - see data sheets for further information (two batteries are supplied with each counter purchased); exchanging one battery at a time retains the last count value. “Lo BAT” on the display will flash approximately 2 weeks prior to end of battery life. A bridge terminal is used to enable programming, removing the bridge wire after programming ensures the security of the product. This counter can be reset externally or by pressing the front button which can also be disabled. Several other display options are available within this product family, these are tachometers, timers, position indicators and totalising counters which offer continuity in panel appearance, please ask for further information.

Downloadable Data Sheets
Downloadable Instruction Manual
Part Number Description
0.734.007 or A103-007 1 Preset Counter - Up to 28V DC or Contact Closure Volt Free Count Input
Downloadable Data Sheets TTCC734 1.05 MB - PDF
Downloadable Instruction Manual TTCC019 522.17 KB - PDF

ISO 9001
Certificate Number: FS 617500

  • Impulse Automation Ltd
    Unit 6 Focus 303
    Focus Way, Walworth Business Park.
    Andover, SP10 5NY
    United Kingdom
  • Tel: +44 (0)1264 364194
    Email: sales@impulseautomation.co.uk
    Registered in the UK - No. 665193
    VAT No. GB207766451